Connector Subsea Solutions
Part of the Subsea Distribution Alliance
MORGRIP® diver-installed subsea clamps utilise a variety of design configurations to best suit the technical and commercial requirements of any repair or hot-tap.
This enables a suite of products tailored to deliver optimal solutions for the largest, most critical hydrocarbon applications, through to those where lowest cost, and quickest delivery and installation are paramount.
MORGRIP® 5000 SERIES LEAK-SEALING CLAMPS
MORGRIP® Leak-Sealing Clamps provide DNV Type Approved, permanent pipeline leak repair with full pressure containment. Designed for pin-hole defects, localised metal loss and media breach applications, they enable seal leak testing without full pipeline hydrotesting and help reduce long-term maintenance costs.
MORGRIP® 5100 SERIES COLLET CLAMPS
MORGRIP® Collet Clamps provide a DNV Type Approved structural repair solution for permanent pipeline leak repair, pressure containment and full pipeline break scenarios. Designed for sweet and sour service, they support pin-hole defects, broad area metal loss, and high H2S or CO2 applications, while helping restore long-term pipeline integrity with a 30-year design life.
MORGRIP® 5200 SERIES MORSMART CLAMPS
MORGRIP® MORSMART Clamps provide a DNV Type Approved structural repair solution for permanent pipeline leak repair, pressure containment and full pipeline break scenarios in non-sour service applications. Designed as a cost-effective option for pin-hole defects, broad area metal loss and stress-induced damage, they help restore long-term pipeline integrity with positive grip and seal activation, no grout requirement and a 30-year design life.
MORGRIP® 5300 SERIES MODULAR CLAMPS
MORGRIP® Modular Clamps provide a DNV Type Approved, EPRS-aligned repair system for structural and leak repair applications. Reconfigurable to suit changing defect profiles, the modular design helps reduce upfront investment by replacing only what is used, while restoring long-term pipeline integrity with twin seals, no seal protection plates and a 30-year design life.
MORGRIP® FLANGE ENCASEMENT CLAMPS
MORGRIP® Flange Encasement Clamps permanently repair leaking or compromised flange joints. Tailored to the flange’s ‘as left’ condition, they restore pressure containment and structural integrity using proven MORGRIP® gripping and sealing technology.
MORGRIP® HOT TAP TEE CLAMPS
MORGRIP® Hot Tap Tee Clamps provide a permanent solution for subsea pipeline hot-tapping, bypasses and tie-ins. Designed with forged-body construction, MORGRIP® gripping and sealing technology, and flexible branch termination options, each clamp can be tailored to suit the parent pipeline, branch size and hot-tap equipment interface.
